ToxicMatt
New Member
Hi,
New to the forum.
I currently run a U1000 on my own car and was professional installed if you can call it that as it took him 4 hours to get it right.
Didn’t want to get another thinkware as the app is awful and always disconnects within 30 seconds of connecting.
I have purchased a A229 pro 3ch for the wife’s car, along with the hardwire kit and fuse taps, the fuses included with the taps from VIOFO are 20amp.
I won’t be using a battery pack with this one and wondered if 20amp was too much and what amperage fuse I should be using.
I will be tapping in to a 3amp fuse for constant live and 15amp for ignition live if that makes a different.
Thank you for your help.
New to the forum.
I currently run a U1000 on my own car and was professional installed if you can call it that as it took him 4 hours to get it right.
Didn’t want to get another thinkware as the app is awful and always disconnects within 30 seconds of connecting.
I have purchased a A229 pro 3ch for the wife’s car, along with the hardwire kit and fuse taps, the fuses included with the taps from VIOFO are 20amp.
I won’t be using a battery pack with this one and wondered if 20amp was too much and what amperage fuse I should be using.
I will be tapping in to a 3amp fuse for constant live and 15amp for ignition live if that makes a different.
Thank you for your help.