aprilia
New Member
I bought the @viofo A139 3ch model and activated the parking mode with the HK3-C kit. I am using a Samsung Evo Plus 256 gb card and I have no problems recording while driving.
The problem doesn't always happen. There are 3 options in parking mode, I have the same problem in all of them. Let's see what the problem is.
I park my car and go home. That's when parking mode comes into play. When the battery of my vehicle falls below 12.0v, the HK3 automatically cuts off the energy. This is also normal. There is no problem with the parking records so far. The problem occurs when I turn on the vehicle ignition after the power has been cut off by the HK3. Only the REC lamp stays on and the camera does not turn on. Power button is useless. Camera gets stuck on boot. The only solution is to disconnect the USB-C cable from the camera. After that it continues to work properly.
For example, I parked my car and started my car again while recording in park mode. There is no problem here either. This problem only happens when the camera is powered off and the car is started when parking mode is on.
I've seen people who have similar problems with the A129 on the forum. But even though it is written that it is solved with the parking mode change, this problem continues for me. I have been using the A118c for the last 8 years until today and I have not had a single problem because I only used it while driving.
@VIOFO-Support
The problem doesn't always happen. There are 3 options in parking mode, I have the same problem in all of them. Let's see what the problem is.
I park my car and go home. That's when parking mode comes into play. When the battery of my vehicle falls below 12.0v, the HK3 automatically cuts off the energy. This is also normal. There is no problem with the parking records so far. The problem occurs when I turn on the vehicle ignition after the power has been cut off by the HK3. Only the REC lamp stays on and the camera does not turn on. Power button is useless. Camera gets stuck on boot. The only solution is to disconnect the USB-C cable from the camera. After that it continues to work properly.
For example, I parked my car and started my car again while recording in park mode. There is no problem here either. This problem only happens when the camera is powered off and the car is started when parking mode is on.
I've seen people who have similar problems with the A129 on the forum. But even though it is written that it is solved with the parking mode change, this problem continues for me. I have been using the A118c for the last 8 years until today and I have not had a single problem because I only used it while driving.
@VIOFO-Support
Last edited: