I recently got a Panorama S(+gps) from shpkorea. I used a 32gb sdhc card I formatted to FAT32. Everything seemed to go well on my test drive with the camera, video was clear and GPS coordinates were spot on.
However, I didn't want to use the 32gb card because I normally use that one in my camera. I bought an identical card only in 16gb size. I formatted it to FAT32 just as I had done before.
The problem is now my camera won't turn on. When I start up the car it flashes the "Panorama S" logo for a second and then goes dark. Blue LED on the front is solid, LED on the back goes back and forth between slow flashing blue and quick flashing red. If I hold the power button the device turns off, when turned back on it makes six quick beeps. If I take the card out it gives 3 quick beeps.
Happens with both cards, even after formatting again.
Thanks for any help!
However, I didn't want to use the 32gb card because I normally use that one in my camera. I bought an identical card only in 16gb size. I formatted it to FAT32 just as I had done before.
The problem is now my camera won't turn on. When I start up the car it flashes the "Panorama S" logo for a second and then goes dark. Blue LED on the front is solid, LED on the back goes back and forth between slow flashing blue and quick flashing red. If I hold the power button the device turns off, when turned back on it makes six quick beeps. If I take the card out it gives 3 quick beeps.
Happens with both cards, even after formatting again.
Thanks for any help!