Prelude89
Member
- Joined
- May 9, 2019
- Messages
- 82
- Reaction score
- 35
- Country
- Australia
- Dash Cam
- Viofo A129 Duo
I've had this model, both an older v1 model, and a later model do this to 4 cards now.
After some time, the cam just gets into a boot loop, sounding the startup chimes repeatedly, with a frozen image with no informational text etc. If I remove the card, it boots fine, gives all the normal on-screen info, and then tells me there's no card.
I have the card that failed last time. It works fine in my Viofo a129, but if I put it back into the SG9665GC I get the boot loop again.
I read in a recent thread Jokiin recommending Sandisk cards. I'm sure I remember someone saying these were not the best choice, but that was some years ago, so they may have fixed the issues.
Does the SG9665GC not like the Samsung cards for some reason?
After some time, the cam just gets into a boot loop, sounding the startup chimes repeatedly, with a frozen image with no informational text etc. If I remove the card, it boots fine, gives all the normal on-screen info, and then tells me there's no card.
I have the card that failed last time. It works fine in my Viofo a129, but if I put it back into the SG9665GC I get the boot loop again.
I read in a recent thread Jokiin recommending Sandisk cards. I'm sure I remember someone saying these were not the best choice, but that was some years ago, so they may have fixed the issues.
Does the SG9665GC not like the Samsung cards for some reason?