look at my post...Hello fellow DR550GW users.
Couple of quick issues:
Number 1:
I have been successful in updating the firmware (DR550GW-2CH_v1.014K(2013.09.25)) , and thanks to the posting above, I was able to get English enable... however, be aware, if you change to another freshly formatted SD card, it will go silent. The new SD card must have the same directory/file setup as the one you modded from or you will likely lose all audio...
Number 2:
I have been unable to get the correct date and time on the device. Initially, I did not get my speed, however that is now working and only the DATE/TIME is set to some system default (2020.08.18). I've monkeyed with the time zone settings, however, no luck.
Any others have this problem? Any suggestions on how to manually set the time/date?
1. Connect to your car DVR with your PC/notebook via Wi-Fi. Default SSID is a
combination of a model name, a dash, and last six symbols of its MAC address.
For example, DR550GW-XXXXXX.
Password: blackvue , or the one you have assigned by setting it up in
configuration files.
2. Use Telnet to make a connection:
IP: 192.168.8.1 , or the one you have assigned by setting it up in
configuration files.
Port: 23
Login: root
Password: tp
You will enter to a command prompt of a Linux shell as a super-user.
3. Execute the following command:
/mnt/mmc/mod001/upgrade.sh
4. Enjoy!
http://car-dvr.info/public/files/DR550-Eng-001.zip
How to convert BlackVue DR550GW-2CH from Korean into EnglishCan anyone help pls?
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
D | Blackvue DR550GW has stopped!!! surddenly!!!! | DR550GW-2CH | 1 | |
Custom firmware BlackVue DR550GW-2CH | DR550GW-2CH | 355 | ||
New firmware Ver2.000 for BlackVue DR550GW-2CH | DR550GW-2CH | 54 | ||
New firmware for BlackVue DR550GW-2CH v1.017 | DR550GW-2CH | 26 | ||
Warning Blackvue DR550GW. UK spec. Firmware upgrade. | DR550GW-2CH | 3 |