Vantrue S1 Pro Running Review

[jonat]

You'd think so... Unfortunately, with Vantrue using custom wiring in their USB-C cables, I'm not sure how to test this. I'll do some voltage probes of my wiring, though this worked with the Garmin I had.

 

[DT MI]

You'd think so... Unfortunately, with Vantrue using custom wiring in their USB-C cables...

I'm not sure their cables are custom. Right now I'm doing some bench testing using these cables for power and connecting the rear camera to the front, and a basic phone charger for a 5V power source. Everything is working just fine as far as I can tell.

https://www.amazon.com/gp/B072LY7465

https://www.amazon.com/gp/B0BNW5CS1B

 

[Agie]

I'm not sure their cables are custom. Right now I'm doing some bench testing using these cables for power and connecting the rear camera to the front, and a basic phone charger for a 5V power source. Everything is working just fine as far as I can tell.

https://www.amazon.com/gp/B072LY7465

https://www.amazon.com/gp/B0BNW5CS1B

This. The Vantrue USB-C cables aren't custom, I've tried Baseus cables and they power all three cameras on my Nexus 4 Pro setup just fine ..

 

[Karagandinez]

My E1 with НK4 from Viofo did not want to work.

 

[Dadi_T]

My E1 with НK4 from Viofo did not want to work.

That's strange. My HK4 it's working with E1.

 

[Karagandinez]

Well, mine doesn't work.
By the way, the A119 Mini didn't want to work with the cable from Vantrue either.
I connected the A119 Mini to the Hardwire Kit from Vantrue.

Universal 11.5ft ACC Hardwire Kit

Compatible 12 – 24V Vehicles This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V. 24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect...

www.vantrue.com

After 5 minutes of operation, the Mini turned off. I immediately checked the Mini from the smartphone’s power supply = it works.
I tried to connect headphones to the Hardwire Kit = they don’t work. After some time, clicking the switch from 11.6V to 12V
and connecting the plug to the headphones and seeing that the headphones were charging, I stopped the experiments.